USB to dual isolated CANbus 2.0B/J1939/CANopen
EMUC-B202
−CANbus 2.0B backward compatible with 2.0A
−Support baud rate 100/125/250/500(default)/800/1000K
−Support CAN message acceptance filter
−Keep configuration after har**are reboot
−Up to 6000 CAN messages per second (receive data)
−Support Listen-only mode
−Additional driver to support Linux SocketCAN
−Support SAE J1939/CANopen high layer protocol (Optional)
−Termination resistor enabled/disabled by jumper
−Complies with EN61000-4-5 2.5kV Surge protection
−Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV
HiPOT protection
−Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
−Supports 3rd mounting hole and USB Pin header for out-ofminicard
installation
−30μ” golden finger, 3-year warranty
−Supports -40 to +85 degrees
−Industrial design, manufactured in Innodisk Taiwan
|
bbbb-Factor |
mPCIe |
|
bbbbb I/F |
USB 2.0 |
|
Output I/F |
CANbus 2.0B |
|
Output Connector |
2 x DB-9 |
|
Power Consumption |
MAX : 3.33W (5V, 665mA; 3.3V, 1008mA) |
|
Dimension (WxLxH) |
30 x 50.9 x 8.35 mm |
|
Temperature |
Operation: W/T: -40°C ~ +85°C Storage: -55°C ~ +95°C |
|
Environment |
Vibration: 5G @7~2000Hz, Shock: 50G @ 0.5ms |
|
Notes |
Download driver and API from MyInnodiskwebsite. bbbbbbs: XP(32bit), 7(32/64bit), 8/8.1(32/64bit), 10(32/64bit) Linux: Kernel 2.6 and above (Native CDC-ACM driver), Kernel 2.6.38 and above (SocketCAN |
