奥地利JAKO波登管压力表和双金属温度计
JAKO一直的压力和温度计量领域的领先生产商之一，60岁及仪器仪表制造商，在奥地利和国外客户信赖的合作伙伴（目前，我们的产品和服务，提供超过30个国家）。我们的生产仍然是基于今天在维也纳奥地利制造和测量设备，我们生产的。
JAKO的客户包括经销批发合作伙伴以及企业销售安装加热，通风，空调和制冷系统，设备工程公司，以及在这个过程中，重工业的仪器和设备制造商，例如在行业集装箱建筑，压缩机工程，锅炉工程，组件工程。
压力和温度是最常见的物理计量单位在许多应用领域的经营和生产过程控制和成本效益的措施和关键参数。
JAKO主要产品及型号：
一、JAKO压力表
标准型波登管压力表
工业型波登管压力表
高精密压力表
隔膜压力表
胶囊压力表
压力表与变送器
电子压力计量
附件和安装部件
JAKO压力表部分产品型号
Fig. 1 Compact pressure gauges
for stand-alone process connectionNS 40; NS 50; NS 63
based on EN 837-1
Fig. 101 Compact pressure gauges
with 3-hole front flange for easy flush mountingNS 40; NS 50; NS 63
based on EN 837-1
Fig. 102 Compact pressure gauges
with rectangular front ring and bracket attachment on the back for flush mountingNS 40; NS 50; NS 63
based on EN 837-1
All-purpose pressure gauges
JAKO all-purpose pressure gauges are cost-effective solutions for a wide range of applications in the sanitary, heating and venitlation engineering as well as in the apparatus and equipment engineering sectors.
Fig. 2 All-purpose pressure gauges
for stand-alone process connectionNS 80; NS 100; NS 160
based on EN 837-1
Fig. 201 All-purpose pressure gauges
with 3-hole front flange for easy flush mountingNS 80; NS 100
based on EN 837-1
Fig. 203 All-purpose pressure gauges
with attachment rim on the back for attachment and surface mountingNS 80; NS 100
based on EN 837-1
Heating pressure gauges
JAKO heating pressure gauges are used for pressure and content monitoring in closed loop heating systems. A green reading range (green banner) on the dial indicates the operating pressure, a red mark the maximum admissible valueand a set value pointer that can be adjusted from the outside shows the required operating pressure.
Fig. 5 Heating pressure gauges
with special scale for content measurement in closed loop heating systemsNS 63; NS 80
based on EN 837-1
Hydrometers
JAKO hydrometers indicate the measured pressure on a twin scale in bar and in mWs.
Fig. 6 Hydrometers
with twin scale for direct reading in meter water column (MWC) and in barNS 80; NS 100
based on EN 837-1
Combined pressure and temperature gauges
JAKO combined pressure and temperature gauges save space and money and are designed for the simultaneous measurement of pressure and temperature at a single point of measurement without high measurement accuracy requirements.
Fig. 80 Combined pressure and temperature gauges
for the combined pressure and temperature measurement, center back mountNS 80
Fig. 81 Combined pressure and temperature gauges
for the combined pressure and temperature measurement, center back mountNS 80
Glycerine filled pressure gagues
JAKO gylcerine filled pressure gauges ensure good pointer readibility and a longer life cycle also at measuring points with mechanical vibrations and pulsating pressure loads.
Fig. 130 Glycerine filled pressure gagues
for stand-alone process connectionNS 40; NS 50; NS 63; NS 100
based on EN 837-1
Fig. 137 Glycerine filled pressure gagues
with 3-hole front flange for easy flush mountingNS 40; NS 50; NS 63; NS 100
based on EN 837-1
Fig. 136 Glycerine filled pressure gagues
二、JAKO温度计产品大类
标准型双金属温度计
工业型双金属温度计
精密温度计
远程读取温度计
玻璃温度计
温度计与变送器
电子温度计量
附件和安装部件
JAKO温度计部分产品型号：
JAKO all-purpose thermometers are specially designed for the wide application field in the heating, ventilation, air conditioning and sanitary engineering sector.
Fig. 20 All-purpose thermometers
with measuring stem, center back mountbased on EN 13190
NS 63; NS 80; NS 100; NS 160
Fig. 21 All-purpose thermometers
with measuring stem, lower mountbased on EN 13190
NS 80; NS 100; NS 160
All-purpose stainless steel thermometers
JAKO all-purpose stainless steel thermometers have a stainless steel housing and, therefore, are particularly suitable for the use in ambient conditions with high air humidity as well as in areas with condensate bbbbation.
Fig. 200 All-purpose stainless steel thermometers
with measuring stem, center back mountbased on EN 13190
NS 50; NS 80; NS 100; NS 160
Air duct thermometers
JAKO air duct thermometers have a mounting rim on the back or a movable spacer flange and, therefore, allow simple and fast mounting on air ducts.
Fig. 205 Air duct thermometers
with mounting rim at the backbased on EN 13190
NS 63; NS 80; NS 100
Fig. 206 Air duct thermometers
with movable spacer flangebased on EN 13190
NS 63; NS 80; NS 100
Clip-on-pipe thermometers
JAKO clip-on-pipe thermometers allow easy installation on pipes for pipe temperature measurement.
Fig. 26 Clip-on-pipe thermometers
with tension spring for pipe mountingNS 63; NS 80
JAKO flue gas thermometers are used for the measurement of exhaust temperatures and are ready made for simple and quick installation with different mounting options.
Fig. 25 Flue gas thermometers
