TM-6710CL / RM-6710CL

1/2” progressive scan interline transfer CCD imager 648(H) x 484(V)
120/60 Hz selectable frame rate
Up to 300 fps in partial scan modes
Full frame shutter, 1/60 to 1/32,000 sec.
Asynchronous reset with external shutter control
8-bit x 2 (or 8-bit x 1) digital Camera bbbb output

The TM-6710CL is a high resolution monochrome camera with non-interlaced quad-speed scanning (120 fps) and partial scanning capabilities of 200 and 100 lines. Since the quad-speed mode is standard, images can be displayed on a multi-sync monitor

The signal is analog progressive scan (484 lines), while the output is Camera bbbb. The full frame electronic shutter with asynchronous reset permits shutter speeds to 1/32,000 sec. The shutter function works in all scanning modes. The camera features 9.0 μm square pixels, providing excellent image definition in all orientations.

Optional features include AGC enable, internal IR cut filter, gamma adjust to 0.45, and remote imagers.

Dimensions (H x W x L): 40 x 46 x 128 mm

TM-6760CL / RM-6760CL

648(H) x 484(V) with 60/30 fps selectable
Digital output and analog output
Full frame integration, two-row binning (648 x 242 pixels) at 120 fps
Partial scan (200 lines, 120 fps)
Full-frame shutter to 1/32,000 sec.
Asynchronous reset, no-delay shutter

The TM-6760CL is a miniature, VGA monochrome progressive scan CCD camera. Based on a high-quality Kodak 1/2” progressive scan image sensor (KAI-0330), this camera offers excellent price perbbbbance with a plenty of flexibility. It has a selectable frame rate of 60 or 30 fps, but can provide full frame integration at 120 fps using two-row binning. 200-line partial scanning is also possible at 120 fps. The TM-6760CL has a substrate drain-type shutter mechanism which provides a superb picture at various speeds without smearing.

The camera provides both analog output and 8-bit Camera bbbb digital output. Camera control is provided via a user-friendly GUI (graphical user interface) or by means of serial commands. The control software includes a patent-pending built-in look-up table (LUT) for maximum control over dynamic range.
The camera’s flexible features make it suitable for a wide range of applications including machine vision, medical imaging, inbbbligent transportation systems, robotics, gauging, character recognition, and surveillance.
Note: This camera is also available with an RS-644/LVDS interface (Part number TM-6760). Customers needing to use the analog output capabilities of the TM-6760 while controlling the camera via RS-232C serial commands must order the LVDS model. For more inbbbbation on the specific features of the LVDS model, including shutter control and back panel connections, please use the bbbb at the right side of this page to download the TM-6760 Series user manual.

Dimensions (H x W x L): 44 x 44 x 63 mm

TM-1020-15CL

1008(H) x 1018(V) resolution @ 15 fps
9.0 μm square pixels with full frame integration for long exposures
Compact housing with high-rel connector
Full-frame shutter to 1/16,000 sec.
Asynchronous reset, no-delay shutter
Read-out-inhibit control for multiple-camera applications

TM-1040

High resolution 1” progressive scan CCD
10-bit digital output (RS-644)
RS-170/RS-343A converted analog output
30 frames per sec. @ 1008 x 1018
Asynchronous reset with external shutter control
Frame memory built-in for async image capturing
Full frame integration with uninterrupted video
RS-232 ext control for all camera bbbbbeters

TM-1325CL / RM-1325CL

1392(H) x 1040(V) @ 30 fps or 15 fps selectable
Full frame integration for long exposures
Image center partial scan (500, 250 lines)
Full-frame shutter to 1/16,000 sec.
Asynchronous reset, no-delay shutter
Near IR sensitivity and high gain CCD output

The TM-1325CL is a compact, high-resolution (1.4 megapixels) monochrome progressive scan CCD camera. The camera's 2/3" sensor (ICX285AL) offers a wide dynamic range with high sensitivity over both visible and near IR portions of the spectrum, making it well suited to applications involving widely varying light conditions, specialized targeting, or inspection of blemishes or defects not easily observed in the visible spectrum. The interline transfer CCD permits full vertical and horizontal resolution of high-speed shuttered images. The TM-1325CL has a selectable frame rate of 15 or 30 fps, and has a substrate drain-type shutter mechanism which provides a superb picture at various speeds without smearing.

The TM-1325CL has a patent-pending, built-in look-up table (LUT) and automatic dual channel compensation. This provides fast 10-bit to 8-bit pre-processing for effective image feature enhancement. The camera has both analog (multiplexed to single channel output) and Camera bbbb digital output for interfacing with frame grabbers.
Note: This camera is also available with an RS-644/LVDS interface (Part number TM-1325). Customers needing to use the analog output capabilities of the TM-1325 while controlling the camera via RS-232C serial commands must order the LVDS model. For more inbbbbation on the specific features of the LVDS model, including shutter control and back panel connections, please use the bbbb at the right side of this page to download the TM-1325 Series manual.

Dimensions (H x W x L): 44 x 44 x 63 mm

在线询盘/留言

*您的姓名：

*联系手机：

固定电话：

*联系邮箱：

所在单位：

*需求数量：

*咨询内容：

您要求给厂家提供：

免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责，本网对此不承担任何保证责任。我们原则上建议您选择本网高级会员或VIP会员。

企业信息

上海凌亮光电科技有限公司

会员级别：

------------ 联系方式 ------------

联系人：储先生（先生）

联系电话：021-32301536

联系手机：13817405842

传真号码：021-60402806

企业邮箱：sales@lingliangvision.com

网址：lingliang.jdzj.com

邮编：200062

企业网站

进入商铺