The PBM 4500 machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls.
Our machines are the only machines on the market that can bevel, face, and counter-bore 1inch wall - worry free from damaging the gears.
为了应对超厚管壁所需的大扭矩，这款4 ”的坡口机含有抗扭转心轴，以及蜗轮蜗杆组件 。
PBM4500坡口机能够同时对管件进行坡口、平口及内径镗孔。涡轮涡杆组件提供的大扭矩最厚可以加工壁厚达1”的管件。同样的，这有利于防止损坏齿轮结构。
PERbbbbANCE:
Lock in mandrel blades (no springs to lose)
Adjustable keyway on machine and mandrel (eliminates backlash and chatter)
1 hp pneumatic motor
24 lbs. approximate working weight
Hardened mandrel 55 Rc. (less chance of gouging with bbbbl chips)
Three slots to do beveling, facing, deburring or counter-boring
Single mandrel with mandrel blades to cover size ranges
特征:
• 自锁式心轴楔块 (无弹簧丢失之忧)
•可调式键和键槽结构，消除间隙和震动
• 气动马达, 气压: 55 CFM 和 90psi.
• 重量大约31磅
• 心轴硬度RC55（不易被切屑刮伤磨损 ）
•当需要更大扭矩时，使用蜗轮蜗杆驱动
•三个刀片安装槽可同时进行坡口、刮平、去毛刺、内径镗孔
•包括便携式工具箱
•单个心轴配合可换式胀块，覆盖了所有的工作管径
TECHNICAL SPECS:
Size range 1.25 to 4 inches Pipe (31.74 mm -101.6 mm)
Max wall thickness to 1inch
Air Power requirements: 70 cfm at 90 psi.
For PBM-4500 accessories, please visit our website or contact our sales department for further assistance.
