TSM-4500M
This lightweight 25lb. Facing Machine has a wide working range of 1 to 4-1/2 inches OD. With our machine you do not have to change adapters if you change tubing size. Our facing tool offers floating collets that let you grip oversize or out-of-round tubing.
As with all our "M" style machines, we offer two types of collets. Use "Standard" to face short tube fittings and use extended collet’s for tubing 4" or longer. It comes with a variable speed motor, allowing you to set a constant operating speed.
管径范围: 1” (25.4mm) 到 4½” (114.3mm)
该机型重量为25磅（11.4公斤），切割的管径范围为1 ” 到 4-1/2” 。管子更换时不必更换连接块，这一点不同于市场上的其他一些机器 。
TSM4500M浮动式夹具对夹持超过标准尺寸以及不圆的管子特别方便有效 。由于它的快速松开特点，因而可以方便快速的更换管件。
PERbbbbANCE:
Size range 1 to 4.5 inches(25.4 mm - 114.3 mm)
110V variable speed control motor with
electronic feedback maintains constant RPMunder load
Rugged two speed design to fit more applications
Quick close latching system reduces setup time
Comes with bench stand
Easy replacement of collets and size ranges
25 lbs. approximate working weight
Adjustable measure indicator for accurate facing 0.001” or longer
Large view port for easy bit replacement
Faces most bbbbls and plastics, including high nickel and carbon steel materials
Tool bit designed to keep chip out of polished ID
Spring loaded collets help align out-of-round tubing
基本特征：
•设计用于切削短管以及长度在1”到4-1/2” （25.4mm 到 114mm）范围内的管件 。
•带有电子反馈功能的重型负载220V变速电机，使得电机转速在不同的载荷下
保持恒定转速
•既可作为便携式又可安装在台面用作批量生产
•大观察孔提供最大的观察区间且便于刀具更换
•通过刀具的设计，切屑避开了抛光的管内圆
•可调测量指示刻度用于更精确的平口切削，最小刻度值为0.0254mm
(0.001”)
•快速锁紧机构节省了大量安装时间
•弹性夹具提高了不圆的管件的定位精度和夹持可靠性
•刀架上带有刻度，使刀具位置确定极其方便
•随机配置台面固定底座
For TSM-4500M accessories, please visit our website or contact our sales department for further assistance.
